GridMonkey — free in your browser
See what the grid is actually running on right now
The live generation mix, the carbon intensity readout, the 24-hour trend and the breakdown by generator — the real-world context behind the electricity factor SAP applies.
Completely free. No sign-up, no ads, no catch.
Quick answer: For five days from 6 to 10 November 2026, wind supplied only 2–10% of Britain’s electricity and gas supplied 55–61%. NESO’s Carbon Intensity API shows daily average grid carbon intensity of 238–261 gCO₂/kWh across those days, peaking at 279 g on 9 November. That is roughly three times the 0.086 kgCO₂e/kWh (86 g) that SAP 10.3 uses for grid electricity, and almost double SAP 10.2’s 0.136. Two days later, on 12 November, the wind returned and the daily average fell to 118 g. None of this changes how a dwelling is assessed: SAP and HEM use fixed, published factors. But it shows how much an annual factor smooths over, and it is the context worth having when a client asks whether a heat pump is “really” low-carbon in a cold, still week.
What happened
The lull started on Friday 6 November. Analyst Kathryn Porter’s Watt-Logic write-up reported that wind was forecast to fall as low as about 500 MW that day, against an installed base of roughly 34 GW. The calm was forecast to last four days. It went on longer than that.
NESO’s generation-mix data for the period (6–10 November) shows how far the system fell back on gas:
| Day (UTC) | Wind | Gas | Nuclear | Imports | Biomass | Average intensity | Peak intensity |
|---|---|---|---|---|---|---|---|
| Fri 6 Nov | 8.8% | 55.2% | 14.1% | 6.2% | 9.0% | 238 g | 256 g |
| Sat 7 Nov | 3.5% | 60.5% | 15.1% | 5.6% | 9.1% | 256 g | 272 g |
| Sun 8 Nov | 2.2% | 61.4% | 15.3% | 6.1% | 8.9% | 260 g | 277 g |
| Mon 9 Nov | 3.4% | 60.5% | 13.6% | 5.9% | 8.5% | 261 g | 279 g |
| Tue 10 Nov | 10.4% | 57.4% | 13.3% | 4.1% | 8.4% | 245 g | 267 g |
Generation shares are unweighted averages of NESO’s half-hourly percentages. Intensity figures are NESO’s “actual” half-hourly estimates in gCO₂/kWh.
Across the five days from 6 to 10 November, intensity averaged about 252 g/kWh and never fell below 220 g.
It was also expensive. The same Watt-Logic analysis, which draws on NESO’s published interconnector auction data, found NESO paying up to about £2,540/MWh for extra imports on 6 November. It also accepted offers from gas plants at close to £1,000/MWh in the Balancing Mechanism.
The contrast at either end of the lull is stark. On 2 November the daily average was 147 g. On 12 November it was 118 g, and in the early hours of 13 November it touched 85 g, close to SAP 10.3’s annual figure, for a single half-hour.
Why the SAP factor looks so different
SAP and HEM electricity factors aren’t snapshots of the grid on a given day. They are projected averages, chosen so that a dwelling’s emissions rate reflects the grid over the period the home will actually run.
SAP 10.3, the methodology for the Future Homes Standard, cuts the grid electricity carbon factor from 0.136 to 0.086 kgCO₂e/kWh. That reflects the expected decarbonisation of the grid over the coming years. It is a deliberate forward-looking assumption, and a calm November week in 2026 doesn’t contradict it. Over the first fortnight of November as a whole, intensity averaged about 193 g/kWh. Over a full year, with summer solar and windy months included, the real-world figure is much lower than in a winter lull.
What the November figures do show is variation. A heat pump’s electricity demand is highest in exactly the cold, still, high-pressure weather that produces lulls like this one. A single annual factor, however good, can’t show that.
What it means in practice
For compliance, nothing changes. Your DER and TER, and your DPER and TPER, are calculated with the fixed factors in the approved methodology: SAP 10.2 for Part L 2021 work, SAP 10.3 for schemes under the Future Homes Standard. You don’t adjust them for the weather, and Building Control won’t expect you to.
For conversations with clients, the numbers are useful.
- A heat pump is still the lower-carbon choice, even in a lull. At 260 g/kWh, a heat pump with a seasonal efficiency of 3 delivers heat at roughly 87 g per kWh of heat. A modern gas boiler is about 0.214 kg/kWh of gas (SAP 10.3) divided by about 0.9 efficiency, which is roughly 238 g per kWh of heat. The heat pump’s margin narrows in a week like this, but it doesn’t disappear.
- Direct electric heating is a different story. Panel heaters at 260 g/kWh emit more carbon per unit of heat than a gas boiler. They are already penalised on primary energy under SAP 10.3, and weeks like this are part of the reason.
- Storage and timing are starting to matter. Batteries, thermal stores and smart tariffs that shift load away from the morning and evening peaks (the highest-intensity half-hours in this lull fell at 20:30–23:30 and 06:00–07:00) are where the real-world carbon gains now sit. SAP doesn’t fully reward them yet.
See the grid for yourself
Our live grid mix shows Britain’s generation mix and carbon intensity as they happen, with the 24-hour trend and a breakdown by generator. It is the real-world context behind the number SAP applies. If you’re preparing a client explainer or an energy statement and want to show where the factor comes from, it’s a good place to start.
Sources: NESO Carbon Intensity API: intensity, 1–15 November 2026 · NESO Carbon Intensity API: generation mix, 6–9 November 2026 and 10 November 2026 · Watt-Logic: “Was NESO panic buying spare capacity on 6 November 2026?” · NESO interconnector auction data