Quick answer: On 12 November 2026 Elmhurst Energy, one of the main energy assessor accreditation schemes, said it has received the confirmed Home Energy Model (HEM) methodology for existing dwellings. Industry calls it HEMIE. It is the calculation that will sit underneath the reformed four-metric EPC and replace RdSAP. Elmhurst expects the information collected for most existing homes to stay largely the same as today, with defaults where precise data isn’t available. Nothing changes for assessors yet. No version number or launch date has been announced, RdSAP 10 remains the only route for existing-dwelling EPCs, and the government’s most recent timetable puts HEM-based EPCs in the second half of 2027.
Why this matters
HEM has been in the news mostly as the replacement for SAP on new builds. But it was always meant to replace RdSAP too. In January 2026 DESNZ consulted on using HEM for EPCs. That consultation proposed that if an assessor switches on all of the simplifications, the experience would be equivalent to RdSAP today. It closed on 18 March, and the launch was then put back to the second half of 2027.
Software providers need a schema before they can build anything: the defined set of inputs the calculation expects. Elmhurst receiving it means the methodology is now fixed enough for providers to start building and testing software against it. It is the first sign of real progress in the transition, rather than just another consultation.
What Elmhurst says is changing
According to Elmhurst’s summary of HEMIE:
- Calculation: monthly calculation is replaced by half-hourly dynamic modelling.
- Geometry and shading: more detailed building geometry and more detailed shading and solar gain calculations.
- Fabric: assessors can use documented U-values, simplified construction descriptions, or layer-by-layer build-ups, so they no longer rely mainly on age-band assumptions. Walls next to an attached or integral garage are recorded as sheltered walls, with the adjacent space set to “garage”.
- Heating and hot water: a wider range of technologies, including heat batteries, heat networks and smart hot water tanks.
- Smart and renewable technology: more detail on solar PV, including inverters, and support for battery storage, PV diverters and smart hot water systems.
- Cooling and ventilation: cooling systems, window opening, infiltration, air permeability and trickle vents.
- Appliances and lighting: assessors record some appliances, such as dishwashers, tumble dryers, separate fridges and freezers, and the oven and hob fuel. Other appliances use a standard profile, and lighting is calculated automatically.
- Measured data: a measured Heat Transfer Coefficient from an approved SMETER test can be recorded alongside the modelled value.
The half-hourly modelling, heat batteries, batteries and optional SMETER results match what DESNZ proposed in January. Some details, such as recording individual appliances, inverters and PV diverters, go further than the consultation paper did. They come from Elmhurst’s reading of the schema, not from a published government document.
What it means for assessors
For now, carry on as normal. Every EPC you lodge is still RdSAP 10, and every certificate issued now stays valid for ten years.
Survey habits will matter more. If a documented U-value or a layer-by-layer build-up can replace an age-band default, the assessors who routinely collect evidence (building control records, product data, the construction seen through a loft hatch or an opening) will be able to produce more accurate ratings. The same applies to PV inverter details, battery capacity and trickle vents. These are all things you might note on a survey now but which don’t change an RdSAP result.
Measured performance gets an official place. Recording a SMETER result alongside the modelled HTC builds on the measured-performance approach we covered in the SMETER strategic guide. For homes that have been retrofitted, the measured figure could become strong evidence.
Training will follow. Elmhurst says its technical teams are still reviewing the changes and any new information requirements, and that more communications will follow. Expect accreditation schemes to publish conversion training well before launch.
What we don’t know yet
There is no version number, no published schema on GOV.UK, no launch date and no date for RdSAP to be withdrawn. The government also still owes the industry the EPC implementation plan it said would be agreed by summer 2026. We’ll update this when DESNZ publishes the methodology itself or confirms a date.
Get ready for fabric-led ratings
If HEM for existing homes rewards documented build-ups rather than age-band defaults, being able to show what a wall, roof or floor is actually made of becomes worth more. That’s true for retrofit, for MEES, and for any client who wants the best rating their home can honestly get.
Calculate a U-value layer by layer →
If you’d like help with a retrofit specification or a fabric-first upgrade plan, get in touch.
Sources: Elmhurst Receives Home Energy Model Methodology Schema for Existing Homes, Elmhurst Energy, 12 November 2026 · The Home Energy Model: Energy Performance Certificates (consultation), DESNZ, January 2026