WaterMonkey — free in your browser
Turn a fittings schedule into litres per person per day
Enter the WCs, taps, bath, shower and appliances and WaterMonkey applies the Approved Document G Table 1 use factors, the normalisation and the external allowance — so you can see straight away whether the scheme clears 125 or 110.
Free to calculate. Building Control-ready PDF from £25 +VAT, covering every identical plot on the site.
Quick answer: Ofwat has amended its Environmental Incentives Common Framework for new connections in England. From April 2027, water companies must allow developers to use flow limiters (inline, built into a fitting, or retrofitted onto a compatible fitting) to help meet the water efficiency level that qualifies a home for an environmental incentive. Each company must still offer at least one water efficiency incentive, and can set a tougher level than the common minimum if it wants to. This is a change to water company charging rules, not to Part G: 125 l/p/d (or 110 where a planning condition says so) is still the Building Regulations requirement.
What’s changed
Since April 2025, every water company in England has had to run environmental incentives for new connections under a common framework set by Ofwat, the water regulator. In practice that means a discount on infrastructure charges, or a payment per plot, for homes built to a water efficiency level below what Building Regulations require, with extra tiers for things like rainwater harvesting, greywater reuse and not connecting surface water to the sewer.
The sticking point has been flow limiters: flow regulators and flow restrictors that cut the water flowing through a pipe or fitting. Some developers wanted to use them to bring a fittings schedule down to the incentive level. Not every water company would accept them.
After a consultation in August 2026, Ofwat has published its conclusions and amended the framework, which sits under rule 51 of the Charging Rules for New Connection Services (English Undertakers). The update:
- adds a definition of a flow limiter covering devices that are installed in-line, integrated into a water fitting, or retrofitted onto a compatible fitting
- requires water companies to let developers use flow limiters to help meet the efficiency level set in the incentive methodology
- keeps the requirement that each company offers at least one water efficiency incentive, measured against a common methodology that sets the minimum level, with companies free to ask for more
- applies from April 2027, so it takes effect with the 2027/28 charging year
Ofwat’s stated aim is to give developers some consistency across water companies, while letting each company keep control of its own charges and incentives.
Why it matters now
Two things make this more than a technical footnote.
The Part G update looks stuck. Defra consulted on cutting the Part G standard from 125 to 105 l/p/d (we covered it in Part G heading for 105 litres). The consultation closed last December and there is still no government response. Since the Autumn Budget pledged no major building regulations changes this Parliament, water bodies have warned that the 105 l/p/d change is among the most exposed. That has not been confirmed as a decision, but it is a real risk. If Part G stays at 125, water company incentives become the main financial reason to build tighter.
The money is real. Incentive structures and values differ by company and change each charging year, so check your local scheme. To give one example, United Utilities’ 2026/27 scheme pays £172 per plot for a fittings specification (WC 4/2.6 litre dual flush, shower 7 l/min, basin taps 5 l/min, sink taps 6 l/min, bath 170 litres, plus efficient appliances) and a further £100 for a 14 l/min flow regulator fitted on the incoming supply. Across a 100-plot site, that adds up.
What it means in practice
Part G compliance and incentives are separate tests. Your Building Control water calculation is still done to Approved Document G, using the fittings that are actually going in. The Ofwat change decides what a water company must accept for its incentive. Before relying on a restrictor in your Part G calculation, check what evidence your Building Control body will accept for the stated flow rate.
Flow limiters are a cheap way to close a gap. A 9 l/min shower brought down to 7 l/min, or 8 l/min basin taps limited to 5 l/min, moves the litres-per-person figure a long way for very little cost. From April 2027, a water company shouldn’t be able to say no just because the reduction comes from a limiter rather than a different fitting.
Installed has to match specified. Incentives are typically paid only after the company has checked what was installed, often with photos or videos of the meter and measured flow rates. A retrofitted restrictor that the plumber leaves out, or the buyer removes, is the obvious weak point. Write limiters into the fittings schedule and the plumbing handover, not just the spec sheet.
Timing. Plots connecting before April 2027 fall under the current rules, and some companies still won’t accept limiters. If you’re phasing a site across the change, it’s worth asking your water company now how it will handle plots either side of it.
What we’d suggest doing
Run your standard house types through the water calculation twice: once against Part G (125, or 110 where conditioned) and once against your water company’s incentive level. Then look at what a set of flow limiters would do to the gap between the two.
WaterMonkey does the Approved Document G calculation in your browser for free, with live PASS/FAIL at 125 or 110 l/p/d and rainwater and greywater included, so you can test a fittings schedule with and without restrictors in a couple of minutes. Building Control-ready PDF reports are £25 +VAT, and one dwelling type covers every identical plot on the site.
Try the free Part G water calculator →
If you’ve got a scheme where water is the sticking point, whether that’s a planning condition, an incentive you’d like to claim, or both, get in touch and we’ll help you work out the cheapest route.
Sources: Ofwat updates Environmental Incentives Common Framework to clarify use of flow limiters in new developments, LexisNexis, 5 November 2026 · Ofwat updates Environmental Incentives Common Framework, WaterBriefing, 9 November 2026 · Ofwat clarifies use of flow limiters in new housing water-efficiency incentives, Water Magazine, 5 November 2026 · Addressing flow limiters in the Environmental Incentives Common Framework, Ofwat · Environmental Incentives Scheme, United Utilities · Freeze on Building Regs could have serious implications for water resources, UKWRA, 11 November 2026